Fighting mold in the bathroom

Fighting mold in the bathroom

Taking care of hygiene and tidiness in the bathroom can effectively prevent the appearance of the fungus. The fungus looks unsightly, gives off an unpleasant smell, brings harm to health. It is better to prevent its occurrence than to fight for a long time with this phenomenon.

If, nevertheless, black mold appeared in the bathroom - how to get rid of it, what are the folk, chemical means, how to wash the fungus from the seams, walls, and ceiling? It seems that it is enough to rub the black areas, seams, and the problem is solved. Unfortunately, despite the elimination of the main sources of the problem, the fungus loves to return. After a few months, disappointment ensues - the unsightly spots become visible again. Dealing with this widespread problem is often time consuming, costly. So that the bathroom does not become the home of the fungus, it is worthwhile to carefully study the problem of how to remove the black coating so that it does not reappear!

What is dangerous mold?

Microclimate even in the cleanest bathroom contributes to the development of fungi, mold.The raid appears:

  • in the bath,
  • shower cabin
  • on silicone sealant,
  • at the junction of the bath with the wall,
  • on tile seams,
  • on the ceiling,
  • in other places.

Common causes of the phenomenon:

  1. high humidity
  2. insufficient ventilation,
  3. rare cleaning
  4. the use of unsuitable finishing materials.

The fungus on the wall is not only an aesthetic problem. Gray, green, black spots are a threat to health.

The harmful effects of mold:

  1. Some types of fungi of the genera: Penicillium, Claviceps, Aspergillus, Fusarium, Rhizoctonia, Stachybotrys produce harmful mycotoxins entering the body through the mouth, breathing, for example, with dust particles. Toxins produced by fungi can cause acute or chronic poisoning.

    Interesting fact. Fungi of the genus Aspergillus, found in Tutankhamun’s tomb, struck treasure seekers who had penetrated the tomb.

  2. Mold on the walls is not pathogenic, does not cause the classic fungal infections that "cling" in the pool, sauna, but produces toxins that can cause a number of problems. Toxins produced by fungi attack the respiratory system, weaken the body's resistance, causing various diseases.
  3. Mycotoxins can cause inflammation of the sinuses of the nose, throat, bronchi, lungs, contribute to the development of asthma, allergies.
  4. Sometimes mycotoxins cause headaches, muscle, joint pain, skin allergies.
  5. Continuous irritability, fatigue, insomnia, decreased concentration, memory, depression, can also be associated with adverse effects of the life of the mold, fungus.
  6. Sometimes toxins cause tingling, numbness in the limbs.
  7. In the gastrointestinal tract, metabolism is disturbed, leading to obesity.
  8. Especially pregnant women, children should avoid moldy rooms.

Even a small stain of fungus should not be underestimated.

Struck walls photo

Ways to fight the fungus

The emergence, development of mold contribute to high humidity, lack of sunlight and temperature in the range of 20-35 degrees Celsius. Therefore, the most vulnerable wet rooms without windows, with poor ventilation:

  • the bathrooms,
  • laundry facilities
  • basements
  • the kitchen.

The presence of the fungus indicates a peculiar musty smell. With the appearance of odor, it is possible to find plaque on the walls, usually tiny spots of gray are visible on the seams.It is important to immediately begin to remove the black patina, otherwise it will be difficult to fight later.

Black, brown, even white deposits on the surface of the seams, the corners of the pallet are the symptoms with which you need to immediately start the fight. Early intervention will help prevent further spread of the unpleasant phenomenon and subsequent costly repairs.

Critical places

Fungi, mold feed on minerals contained in building materials. Most susceptible:

  • gypsum,
  • tree.

Both parasites often appear as a duet, but fungi bring the most damage. Their gradual penetration into the material causes:

  • bleaching seams;
  • cracking plaster;
  • peeling paint;
  • falling off of wallpaper;
  • peeling of plaster;
  • deep detachment can destroy the joints between bricks;
  • destroyed, rotting wood structure.

Therefore, it is especially dangerous when mushrooms attack the structural elements of the house - pillars, ceiling beams that lose strength.

Home remedies for the destruction of mold

How to deal with stubborn fungus, without causing great harm to others? There are home remedies, but they are not always effective.The following tools are popular than to mold the mold with your own hands:

  • baking soda,
  • lemon juice,
  • washing powder
  • dishwashing liquid,
  • vinegar,
  • Toothpaste.

But it is often not enough to wipe off a black patina with a sponge, cloth, brush using simple home remedies. Visible on the surface plaque - only a symptom of the problem, covering the seams, silicone seals, in the worst case - walls, ceiling.

Baking soda

Soda - the perfect detergent. With the help of soda cleaned various surfaces that are not afraid of scratches. Cleaning steps:

  1. sprinkle soda over the soiled surface
  2. leave for 20-30 minutes
  3. brush wipe
  4. remove soda with a damp sponge, brush.

Vinegar

Vinegar should be diluted in proportion: one part of vinegar - two parts of water. The solution will remove the fungus from the surface:

  • sealants,
  • seams,
  • tiles,
  • mirrors
  • glass shower.

When cleaning highly contaminated seams, silicones, soda is added to the vinegar solution. After applying the product, wait 10 minutes, then clean the surface with a brush.

Toothpaste

Toothpaste will help whiten the stitches. The paste is suitable for removing the newly appeared mold on the joints, silicone sealants. A large amount of paste is applied to the contaminated surface, rubbed with a brush.

Chemical control agents

If a small cluster of mold is noticed, remove it with a coarse brush with a solution of chlorine, ammonia or baking soda and dry it thoroughly, for example, with a hair dryer. Available chemical agents (anti-molds) have a high concentration of active chlorine.

How to remove the fungus from household chemistry? Can be used:

  • liquid detergent,
  • bleach toilets.

Do not forget about the protection of respiratory organs, eyes, skin from aggressive chemistry.

How to remove the fungus on the seams, sealant?

  1. Starting to remove mold from the seams, you will have to remove all the seams in the affected and adjacent areas.
  2. Then you need to cut the mold on the sealant as deep as possible with a sharp knife.
  3. How to kill the fungus at the seams? Prepared places are covered with a special mold or fungicide agent designed for bathrooms. Empty clean seam should be carefully, at least 2 times to cover the fungicidal agent. The tool deactivates the infected areas, will help to clear the affected areas completely. The fungicide should be completely dry, then the spores of microorganisms will be destroyed, the problem will not return, making all our efforts in vain.A special remedy for black mold will help ensure the safety of the tile that is in direct contact with the seams.
  4. Then cleaned, degreased seams need to apply a new silicone and grout. It is necessary to choose products that have fungicidal properties that prevent the growth of fungi.

Preventive measures

Mold can appear in almost any bathroom, regardless of the frequency of cleaning. Poor ventilation, insufficient ventilation stimulates the appearance of fungus. What to do for prevention?

  1. It is necessary to provide free air circulation: holes must be made in the doors, small slots should be made in the lower part. You can install a special grill in the door if there is a window in the room - artificial ventilation.
  2. Maintaining proper moisture creates unfavorable conditions for the development of fungus. High humidity and heat create ideal conditions for the growth of fungus. It is necessary to maintain humidity not higher than 60%, to quickly respond to any signs of excess moisture.
  3. Improper joint filling is a common cause of mold. Places filled with silicone, you must first thoroughly clean, dry, degrease.Otherwise, moisture penetrates into them, ideal conditions are created for the development of spores, mycelium.
  4. Unprofessional tiling, plumbing installation - a common cause of the fungus. Water should flow freely, not accumulate in the grooves, joints, exposing silicone sealants, seams to the attack of the fungus.
  5. Long-lasting dampness of walls, floors can lead to a major overhaul, which will be the only chance to cope with the problem.

Consequences of water accumulation from improper installation of the bath, photo

Everyone's dream is an ideal home free from harmful microorganisms. Everyone tries to maintain order, hygienic cleanliness. But bathrooms especially likes mold. If the first signs of this phenomenon are noticed, do not be fooled by seeking advice on how to clean the bathroom tile from the mold with brushes and sponges. Only quick actions aimed at replacing seams and sealants occupied with mycelium will protect against serious spread of the fungus and help remove the enemy forever.

Related news

  • Interesting Laugh Facts
  • I will not worry about who does not care about me
  • Popular misconceptions about nudism
  • Scenes of violence cause indifference
  • Yummy in 15 minutes. The matchless dish, the recipe of which will be begging for all the friends
  • Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom

    Fighting mold in the bathroom